426143P Fisher and Paykel Compatible Cold Inlet Valve

Fisher & Paykel Compatible Cold Inlet Valve – 426143P

If your Fisher & Paykel washer will not fill, fills very slowly, keeps filling when it should have stopped, or drips into the drum while switched off, the cold inlet valve is the usual cause. The solenoid either stops opening properly or fails to seal shut when de-energised.

This is a single-way (1 way) cold inlet valve with a 90° outlet and Ø12 mm outlet pipe. Backed by a 12-month warranty*.

What this valve fixes

• Machine not filling, or filling far more slowly than it used to
• Machine continuing to fill past the selected level
• Water trickling into the drum while the machine is off
• Buzzing or humming from the valve without water flowing
• Cycle stalling at the fill stage

Specifications

• Type: 1 way (single) cold inlet valve
• Outlet angle: 90°
• Outlet pipe: Ø12 mm

Compatible Fisher & Paykel models

Suits the following models:

GW500, GW501, GW503, GW508, GW508U (93105), GW600, GW601, GW603, GW608, GW650, GW700, GW701, GW703, GW703-U (93976), GW708, MW050, MW05, MW053, MW053-U (93973), MW058, MW060, MW070, AW058, AW085, AW095 plus many more. Contact us with your model information to confirm if this part is suitable for you.

Before you order, check that your valve is a single (one solenoid) unit with a 90° outlet – some machines use a twin or triple valve, which is a different part.

Not sure if it fits? Send us your model number and product code, along with a photo of the old valve, and we will confirm before you buy.

Why buy from Electrical Supplies Australia

• Correct single-way valve with 90° outlet – no guesswork
• 12-month warranty* for peace of mind
• Fast dispatch from our Brisbane warehouse
• 14-day returns

*Warranty covers manufacturing defects. Correct fitment is the responsibility of the installer – please confirm your model and valve type if you are unsure.