12014980 Genuine Bosch Heat Pump

Genuine Bosch Dishwasher Heat Pump – 12014980

If your Bosch dishwasher is leaving dishes dirty or wet, not heating the water, or stopping mid-cycle with a heating fault, the heat pump is the usual cause. This is the genuine Bosch heat pump assembly (part 12014980) – the combined wash pump and heater that drives circulation and brings the water up to temperature.

Supplied as a genuine, factory-sealed Bosch part and backed by a 12-month warranty*.

What this part fixes

• Water not heating – cold or lukewarm wash
• Dishes coming out dirty, greasy or still wet
• Bosch heating fault code E09
• Programme stopping part-way through the cycle
• Wash pump humming, grinding or not circulating water

Compatible models

Suits a wide range of Australian-market Bosch dishwashers, including:

• SMI (built-in): SMI46GS01A/13 · SMI66MS01A/01, /31, /47 · SMI88TS01A/33 · SMI88TS02A/01, /40
• SMS (freestanding): SMS40E08AU/48, /51 · SMS46GI01A/51, /52 · SMS46KI02A/01 · SMS50E32AU/48 · SMS66JI01A/41, /51 · SMS66MI02A/01, /41 · SMS66MI03A/41 · SMS66MW01A/01 · SMS68M38AU/D3 · SMS88TI01A/27, /33, /52 · SMS88TI04A/01
• SMU (under-bench): SMU46GS01A/08, /18 · SMU66MS01A/01 · SMU66MS02A/01 · SMU68M25AU/D4 · SMU88TS02A/01, /38 · SMU88TS04A/01
• SMV (fully integrated): SMV66MX01A/01 · SMV88TX01A/33 · SMV88TX02A/01
• SMP / SPU: SMP66MX01A/01 · SPU68M05AU/01, /40
• S-series: S215M60S0A/01 · S425T80S0A/01 · S515M60X0A/01 · S525T80D0A/01

The number after the slash is the production version from your rating plate – it can affect fitment, so check it against the list above.

The same heat pump is also used in a number of Siemens and Neff dishwashers.

Not sure if it fits? Send us your full model number and production version (E-Nr, on the sticker inside the door) and we will confirm the correct heat pump before you buy.

Why buy from Electrical Supplies Australia

• Genuine, factory-sealed Bosch part
• 12-month warranty* for peace of mind
• Fast dispatch from our Brisbane warehouse
• 14-day returns

*Warranty covers manufacturing defects. Correct fitment is the responsibility of the installer – please confirm your model and production version if you are unsure.